Save-A-Life Ladder Extension
Access in and out of roof hatches can be stressful and pose a real threat of injury. The S.A.L. Ladder Extension mounts easily onto all metal roof hatches and can be placed on either the right or left side of the hatch opening. All units are constructed with 1 1/2" x 1/4" steel vertical rails and 1/2" round horizontal rungs. Ladder extensions have a bright yellow epoxy finish.Technical Illustrations
| Model No. Ladder |
Overall Height |
Horizontal Rails |
Weight |
| SAL-1 |
21" |
20" |
11 lbs |
| Ladders include two (2) interior 2 1/4" x 5 1/2" reinforcing plates and four (4) 3/8" x 1" zinc plated hex bolts with washers and lock nuts. |
Safety Guard Rail
Access in and out of roof hatches can be stressful and pose a real threat of injury. The Lane-Aire Safety Guard Rail mounts easily to all roof hatches after the roof hatch has been installed. Because of a unique clamping feature, no holes are required through the roof hatch or reoofing system, thus maintaining the roofing system warranty. Safety Guard Rails meet the intent of OSHA standard 29 CFR 1910.23 and 27 that requires compliance for safe ingress and egress through hatch openings in the roof.
Technical Illustrations
| Model No. |
Roof Hatch Opening |
Model No. |
Roof Hatch Opening |
| SGR-3232 |
24" x 24" |
SGR-3238 |
24" x 30" |
| SGR-3244 |
24" x 36" |
SGR-3838 |
30" x 30" |
| SGR-3844 |
30" x 36" |
SGR-3862 |
30" x 54" |
| SGR-38104 |
30" x 96" |
SGR-4444 |
36" x 36" |
| SGR-4456 |
36" x 48" |
SGR-44104 |
36" x 96" |
| SGR-5656 |
48" x 48" |
|